Canada
USA
Japan
Used Boats
Used Outboards
Outboard Parts
Engines & Outboards
New Outboard Motors
Seapro & Parsun Bundle
Mercury Marine Propellers
Michigan Propellers
OMC Outboards Propellers
Batteries
Boats & Motor Parts
Bunk Range
Special OfferElite Series - SpitFire
Enertia (15 x 15″) Mercury LH Propeller For 135/400hp Mercury/Mariner & 90-115hp Command Thrust Outboard, 48-8M0151230
$683.66Specs:
- Hub kit sold separately, see the fitment information below to select the correct hub kit for your application.
- Right hand rotation propeller (clockwise rotation)
- Enabled with 3-hole Performance Vent System (PVS) to allow optimal hole-shot customization
- Made with Mercury’s proprietary X7 alloy for added strength and durability
- Improves both top speed and acceleration on center consoles, high-horsepower pontoons, and sterndrive runabouts
Fitment: Mercury Outboards: Mercury, 135/400 hp , Command Thrust Outboard 90-115hp
- 135-400HP Outboards, 1978-Newer
- Use Hub Kit #835257K1 for all 2-Stroke outboards
- Use Hub Kit #8M0150151 for 135-225HP 4-Stroke outboards with 1.0″ prop shaft
- Use Hub Kit #8M0101602 for 225+HP 4-Stroke outboards with 1.0″ prop shaft
- Use Hub Kit #8M0101601 for all 1.25″ prop shaft applications (V8 Fourstroke & 350-450 Verado)
- 90-115HP Command Thrust (CT), 2014-Newer
- Note: This will only fit the 90-115 Command Thrust gearcase, it will not fit a standard 90-115 gearcase
- Use Hub Kit #8M0150151
Mercury Mercruiser; Mercury Mercruiser Alpha & Bravo One
- For all engines with an Alpha or Bravo One drive
- Use Hub Kit #835257K1 for all applications less that 300HP
- Use Hub kit #835258K2 for all application over 300HP with 1.0″ prop shaft
- Use Hub Kit #840389K06 for all 1.25″ prop shaft applications
Non-Mercury Outboard, 4.75″ Gearcase
- Evinrude/Johnson/OMC (1991 and newer) – Use Hub Kit #8M0119081
- Evinrude/Johnson/OMC (1990 and older) – Use Hub Kit #8M0119082
- Evinrude E-TEC G2 (2015 and newer) – Use Hub Kit #8M0107220
- Honda 135-225HP – Use Hub Kit #835278Q1
- Suzuki 150-300HP – Use Hub Kit #835281Q1
- Yamaha 150-300 HP including SHO (2015 and newer) – Use Hub Kit #835274Q1
- Yamaha 200-250 HP SHO (2014 and older) – Use Hub Kit #8M0075402
Enertia (15.3 x 14″) Mercury RH Propeller For 135/400hp Mercury/Mariner & 90-115hp Command Thrust Outboard, 48-8M0151229
$683.66Specs:
- Hub kit sold separately, see the fitment information below to select the correct hub kit for your application.
- Right hand rotation propeller (clockwise rotation)
- Enabled with 3-hole Performance Vent System (PVS) to allow optimal hole-shot customization
- Made with Mercury’s proprietary X7 alloy for added strength and durability
- Improves both top speed and acceleration on center consoles, high-horsepower pontoons, and sterndrive runabouts
Fitment: Mercury Outboards: Mercury, 135/400 hp , Command Thrust Outboard 90-115hp
- 135-400HP Outboards, 1978-Newer
- Use Hub Kit #835257K1 for all 2-Stroke outboards
- Use Hub Kit #8M0150151 for 135-225HP 4-Stroke outboards with 1.0″ prop shaft
- Use Hub Kit #8M0101602 for 225+HP 4-Stroke outboards with 1.0″ prop shaft
- Use Hub Kit #8M0101601 for all 1.25″ prop shaft applications (V8 Fourstroke & 350-450 Verado)
- 90-115HP Command Thrust (CT), 2014-Newer
- Note: This will only fit the 90-115 Command Thrust gearcase, it will not fit a standard 90-115 gearcase
- Use Hub Kit #8M0150151
Mercury Mercruiser; Mercury Mercruiser Alpha & Bravo One
- For all engines with an Alpha or Bravo One drive
- Use Hub Kit #835257K1 for all applications less that 300HP
- Use Hub kit #835258K2 for all application over 300HP with 1.0″ prop shaft
- Use Hub Kit #840389K06 for all 1.25″ prop shaft applications
Non-Mercury Outboard, 4.75″ Gearcase
- Evinrude/Johnson/OMC (1991 and newer) – Use Hub Kit #8M0119081
- Evinrude/Johnson/OMC (1990 and older) – Use Hub Kit #8M0119082
- Evinrude E-TEC G2 (2015 and newer) – Use Hub Kit #8M0107220
- Honda 135-225HP – Use Hub Kit #835278Q1
- Suzuki 150-300HP – Use Hub Kit #835281Q1
- Yamaha 150-300 HP including SHO (2015 and newer) – Use Hub Kit #835274Q1
- Yamaha 200-250 HP SHO (2014 and older) – Use Hub Kit #8M0075402
Spitfire (10.1 x 14″) Mercury RH Propeller For 25hp Mercury/Mariner & 60hp Mercury Command Thrust Outboard, 48-8M8026635
$271.99Specs:
- Equipped with Flo-Torq Reflex Hub (#835257K12)
- 10.1″ Diameter
- 14″ Pitch
- Right Hand Rotation
- 25 HP BigFoot, 30 HP 4-Stroke (2005 and earlier) 40-60 HP 2-stroke and 4-stroke outboards
- If engine RPM is appropriate with 3-blade prop, replace with the same pitch Spitfire propeller. *According to Mercury Propeller Guide
Fitment: Mercury Outboards: Mercury/Mariner 25 HP,Bigfoot Command Thrust 60 HP Outboard
- 25 HP Bigfoot/Command Thrust (CT) (4-Stroke)
- 30 HP 2-Stroke
- 30 HP Bigfoot/Command Thrust (CT) 2010 and Newer
- 30-40 HP SeaPro/Marathon
- 30 (4-Stroke) 1994-2005
- 40-60 HP 2-Stroke and 4-Stroke (Not BigFoor/CT) 1977 and Newer
- SeaPro/Marathon 55 HP
- 13 Tooth Spline
- Note: for older rubber hub propellers – use Merucyr hardware kit 11-31990Q02
- Note: Propeller hardware is not compatible between rubber hub propellers and Flo-Torq Reflex propellers
Spitfire (10.1 x 15″) Mercury RH Propeller For 25hp Mercury/Mariner & 60hp Mercury Command Thrust Outboard, 48-8M8026640
$271.99Specs:
- Equipped with Flo-Torq Reflex Hub (#835257K12)
- 10.1″ Diameter
- 15″ Pitch
- Right Hand Rotation
- 25 HP BigFoot, 30 HP 4-Stroke (2005 and earlier) 40-60 HP 2-stroke and 4-stroke outboards
- If engine RPM is appropriate with 3-blade prop, replace with the same pitch Spitfire propeller *According to Mercury Propeller Guide
Fitment: Mercury Outboards: Mercury/Mariner 25 HP,Bigfoot Command Thrust 60 HP Outboard
- 25 HP Bigfoot/Command Thrust (CT) (4-Stroke)
- 30 HP 2-Stroke
- 30 HP Bigfoot/Command Thrust (CT) 2010 and Newer
- 30-40 HP SeaPro/Marathon
- 30 (4-Stroke) 1994-2005
- 40-60 HP 2-Stroke and 4-Stroke (Not BigFoor/CT) 1977 and Newer
- SeaPro/Marathon 55 HP
- 13 Tooth Spline
- Note: for older rubber hub propellers – use Merucyr hardware kit 11-31990Q02
- Note: Propeller hardware is not compatible between rubber hub propellers and Flo-Torq Reflex propellers
Spitfire (10.3 x 13″) Mercury RH Propeller For 25hp Mercury/Mariner & 60hp Mercury Command Thrust Outboard, 48-8M8026630
$271.99Specs:
- Equipped with Flo-Torq Reflex Hub (#835257K12)
- 10.3″ Diameter
- 13″ Pitch
- Right Hand Rotation
- 25 HP BigFoot, 30 HP 4-Stroke (2005 and earlier) 40-60 HP 2-stroke and 4-stroke outboards
- If engine RPM is appropriate with 3-blade prop, replace with the same pitch Spitfire propeller *According to Mercury Propeller Guide
Fitment: Mercury Outboards: Mercury/Mariner 25 HP,Bigfoot Command Thrust 60 HP Outboard
- 25 HP Bigfoot/Command Thrust (CT) (4-Stroke)
- 30 HP 2-Stroke
- 30 HP Bigfoot/Command Thrust (CT) 2010 and Newer
- 30-40 HP SeaPro/Marathon
- 30 (4-Stroke) 1994-2005
- 40-60 HP 2-Stroke and 4-Stroke (Not BigFoor/CT) 1977 and Newer
- SeaPro/Marathon 55 HP
- 13 Tooth Spline
- Note: for older rubber hub propellers – use Merucyr hardware kit 11-31990Q02
- Note: Propeller hardware is not compatible between rubber hub propellers and Flo-Torq Reflex propellers
Spitfire (10.6 x 11″) Mercury RH Propeller For 25hp Mercury/Mariner & 60hp Mercury Command Thrust Outboard, 48-8M8026620
$271.98Specs:
- 9.3″ Diameter
- 11″ Pitch
- Right Hand Rotation
- Equipped with Flo-Torq Reflex Hub Kit
- 25 HP BigFoot, 30 HP 4-Stroke (2005 and earlier) 40-60 HP 2-stroke and 4-Stroke outboars
- If engine RPM is appropriate with 3-blade prop, replace with the same pitch Spitfire propeller *According to Mercury Propeller Guide
Fitment: Mercury Outboards: Mercury/Mariner 25 HP,Bigfoot Command Thrust 60 HP Outboard
- 25 HP Bigfoot/Command Thrust (CT) (4-Stroke)
- 30 HP 2-Stroke
- 30 HP Bigfoot/Command Thrust (CT) 2010 and Newer
- 30-40 HP SeaPro/Marathon
- 30 (4-Stroke) 1994-2005
- 40-60 HP 2-Stroke and 4-Stroke (Not BigFoor/CT) 1977 and Newer
- SeaPro/Marathon 55 HP
- 13 Tooth Spline
- Note: for older rubber hub propellers – use Merucyr hardware kit 11-31990Q02
- Note: Propeller hardware is not compatible between rubber hub propellers and Flo-Torq Reflex propellers
Spitfire (10.6 x 12″) Mercury RH Propeller For 25hp Mercury/Mariner & 60hp Mercury Command Thrust Outboard, 48-8M8026625
$271.99Specs:
- Equipped with Flo-Torq Reflex Hub (#835257K12)
- 10.6″ Diameter
- 12″ Pitch
- Right Hand Rotation
- 25 HP BigFoot, 30 HP 4-Stroke (2005 and earlier) 40-60 HP 2-stroke and 4-stroke outboards
- If engine RPM is appropriate with 3-blade prop, replace with the same pitch Spitfire propeller *According to Mercury Propeller Guide
Fitment: Mercury Outboards: Mercury/Mariner 25 HP,Bigfoot Command Thrust 60 HP Outboard
- 25 HP Bigfoot/Command Thrust (CT) (4-Stroke)
- 30 HP 2-Stroke
- 30 HP Bigfoot/Command Thrust (CT) 2010 and Newer
- 30-40 HP SeaPro/Marathon
- 30 (4-Stroke) 1994-2005
- 40-60 HP 2-Stroke and 4-Stroke (Not BigFoor/CT) 1977 and Newer
- SeaPro/Marathon 55 HP
- 13 Tooth Spline
- Note: for older rubber hub propellers – use Merucyr hardware kit 11-31990Q02
- Note: Propeller hardware is not compatible between rubber hub propellers and Flo-Torq Reflex propellers
Spitfire (12.5 x 19″) Mercury RH Propeller For 40hp Mercury/Mariner & 125hp Mercury Command Thrust Outboard, 48-8M8026600
$266.99Specs:
- Equipped with Flo-Torq II Hub kit #835257K1
- 12.5″ Diameter
- 19″ Pitch
- Right Hand Rotation
- 40-60 HP Bigfoot 4-strokes, 75-125 HP 2 and 4-stroke outboards
- 10-13″ Pitches are designed to provide superior holding and lift for pontoon boats!
- If engine RPM is appropriate with 3-blade prop, replace with the same pitch Spitfire propeller *According to Mercury Propeller Guide
Fitment: Mercury Outboards: Mercury/Mariner 40 HP,Bigfoot Command Thrust 125 HP Outboard
- 40-60 HP BigFoot/Command Thrust (CT) All Years
- 75-125 HP 1978 and Newer
- 15 Tooth Spline
- Note: Flo-Torq III Hub Kit 835257K9 is recommended for 40-60 HP BigFoot/Command Thrust (CT) and 75-115 HP
Non-Mercury Engines;Non-Mercury Outboard, 4-1/4 ” Gearcase
- Non-Mercury Outboard (4-1/4 in. Gearcase)
- Suzuki/Johnson 90-115 HP 4-Stroke 2001-2008 – use hub kit 835283Q1
- Suzuki/Johnson 100-115 4-Stroke 2009 and Newer 140 HP 4-Stroke – use hub kit 835283Q2
- Suzuki 70-90 HP 4-Stroke 2009 and Newer – use hub kit 835283Q03
- Honda 75-90 HP 1998 and Older – use hub kit 835277Q1
- Honda 75-90 HP 1999 and Newer, 115-130 HP – use hub kit 835279Q2
- Yamaha 50-100 HP – use hub kit 835272Q1
- Yamaha 115-130 HP – use hub kit 835271Q2
Spitfire (13 x 17″) Mercury RH Propeller For 40hp Mercury/Mariner & 125hp Mercury Command Thrust Outboard, 48-8M8026590
$301.75Specs:
- Equipped with Flo-Torq II Hub kit #835257K1
- 13″ Diameter
- 17″ Pitch
- Right Hand Rotation
- 40-60 HP Bigfoot 4-strokes, 75-125 HP 2 and 4-stroke outboards
- 10-13″ Pitches are designed to provide superior holding and lift for pontoon boats!
- If engine RPM is appropriate with 3-blade prop, replace with the same pitch Spitfire propeller *According to Mercury Propeller Guide
Fitment: Mercury Outboards: Mercury/Mariner 40 HP,Bigfoot Command Thrust 125 HP Outboard
- 40-60 HP BigFoot/Command Thrust (CT) All Years
- 75-125 HP 1978 and Newer
- 15 Tooth Spline
- Note: Flo-Torq III Hub Kit 835257K9 is recommended for 40-60 HP BigFoot/Command Thrust (CT) and 75-115 HP Optimax to reduce clutch rattle
Non-Mercury Engines;Non-Mercury Outboard, 4-1/4 ” Gearcase
- Non-Mercury Outboard (4-1/4 in. Gearcase)
- Suzuki/Johnson 90-115 HP 4-Stroke 2001-2008 – use hub kit 835283Q1
- Suzuki/Johnson 100-115 4-Stroke 2009 and Newer 140 HP 4-Stroke – use hub kit 835283Q2
- Suzuki 70-90 HP 4-Stroke 2009 and Newer – use hub kit 835283Q03
- Honda 75-90 HP 1998 and Older – use hub kit 835277Q1
- Honda 75-90 HP 1999 and Newer, 115-130 HP – use hub kit 835279Q2
- Yamaha 50-100 HP – use hub kit 835272Q1
- Yamaha 115-130 HP – use hub kit 835271Q2
Spitfire (13.4 x 15″) Mercury RH Propeller For 40hp Mercury/Mariner & 125hp Mercury Command Thrust Outboard, 48-8M8026580
$301.75Specs:
- Equipped with Flo-Torq II Hub kit #835257K1
- 13.4″ Diameter
- 15″ Pitch
- Right Hand Rotation
- 40-60 HP Bigfoot 4-strokes, 75-125 HP 2 and 4-stroke outboards
- 10-13″ Pitches are designed to provide superior holding and lift for pontoon boats!
- If engine RPM is appropriate with 3-blade prop, replace with the same pitch Spitfire propeller *According to Mercury Propeller Guide
Fitment: Mercury Outboards: Mercury/Mariner 40 HP,Bigfoot Command Thrust 125 HP Outboard
- 40-60 HP BigFoot/Command Thrust (CT) All Years
- 75-125 HP 1978 and Newer
- 15 Tooth Spline
- Note: Flo-Torq III Hub Kit 835257K9 is recommended for 40-60 HP BigFoot/Command Thrust (CT) and 75-115 HP Optimax to reduce clutch rattle
Non-Mercury Engines;Non-Mercury Outboard, 4-1/4 ” Gearcase
- Non-Mercury Outboard (4-1/4 in. Gearcase)
- Suzuki/Johnson 90-115 HP 4-Stroke 2001-2008 – use hub kit 835283Q1
- Suzuki/Johnson 100-115 4-Stroke 2009 and Newer 140 HP 4-Stroke – use hub kit 835283Q2
- Suzuki 70-90 HP 4-Stroke 2009 and Newer – use hub kit 835283Q03
- Honda 75-90 HP 1998 and Older – use hub kit 835277Q1
- Honda 75-90 HP 1999 and Newer, 115-130 HP – use hub kit 835279Q2
- Yamaha 50-100 HP – use hub kit 835272Q1
- Yamaha 115-130 HP – use hub kit 835271Q2
Spitfire (14 x 17″) Mercury RH Propeller For 90/115hp Mercury/Mariner & 135-350hp Command Thrust, Optimax and Verado Outboard, 48-8M0084494
$240.04Specs:
- Equipped with Flo-Torq II Hub kit #835257K1
- 14″ Diameter
- 17″ Pitch
- Right Hand Rotation
- The high performance blade design is not recommended for Alpha One drives with a 1.47 ratio
- For 135+ HP 4-stroke outboards and Alpha nad Bravo I sterndrives
- If engine RPM is appropriate with 3-blade prop, replace with the same pitch Spitfire propeller *According to Mercury Propeller Guide
Fitment: Mercury Outboards: Mercury/Mariner EFI, 90/115 hp , Command Thrust, Optimax and Verado Outboard 135-350hp
- 135-350 HP 1978 and Newer and 90/115 Command Thrust 2014 and Newer
- 15 Tooth Spline
- Note: Use Flo-Torq IV hub kit (835257K10) to reduce clutch rattle on 90/115 Command Thrust, 135-200 HP 4 cylinder Verado and 150 4-Stroke. Clutch rattle may be present when using 18 pitch or lower stainless steel propellers.
- Note: 350 Verado SCI requires hub kit 840389K06
Mercury Mercruiser; Mercury Mercruiser Alpha & Bravo One
- Alpha and Bravo One Sterndrives – All Horsepowers
- 15 Tooth Spline
- For 400HP+ Use Flo-Torq solid hub assembly. Replace A46 with A55 or order hub kit part number #835258K2
- For Bravo One XR and XZ drives, Use Flo-Tor 1 1/4″ hub assembly. Replace A46 with A65 or order hub kit part number #840389K06
Non-Mercury Engines: Non-Mercury Outboard/Sterndrive, 4-3/4″ Gearcase
- Evinrude/Johnson/OMC 1991 and newer – use hub kit 835265Q02
- Evinrude/Johnson/OMC 1990 and older – use hub kit 835267Q1
- Honda 135-225 HP – use hub kit 835278Q1
- Suzuki 150-300 HP – use hub kit 835281Q1
- Yamaha 150 -300 HP – use hub kit 835274Q1
- Yamaha 200-250 HP SHO – use hub kit 8M0075402
Spitfire (14 x 19″) Mercury RH Propeller For 90/115hp Mercury/Mariner & 135-350hp Command Thrust, Optimax and Verado Outboard, 48-8M0084495
$254.29Specs:
- Equipped with Flo-Torq II Hub kit #835257K1
- 14″ Diameter
- 19″ Pitch
- Right Hand Rotation
- The high performance blade design is not recommended for Alpha One drives with a 1.47 ratio
- For 135+ HP 4-stroke outboards and Alpha nad Bravo I sterndrives
- If engine RPM is appropriate with 3-blade prop, replace with the same pitch Spitfire propeller *According to Mercury Propeller Guide
Fitment: Mercury Outboards: Mercury/Mariner EFI, 90/115 hp , Command Thrust, Optimax and Verado Outboard 135-350hp
- 135-350 HP 1978 and Newer, and 90/115 CT 2014 and Newer
- 15 Tooth Spline
- Note: Use Flo-Torq IV hun kit (835257K10) to reduce clutch rattle on 90/115 HP Command Thrust (CT), 135-200 HP 4 cyliner Verado and 150 FourStroke. Clutch rattle may be present when using 18P or lower stainless steel propellers.
- 350 Verado SCI requires hub kit 840389K06
Mercury Mercruiser; Mercury Mercruiser Alpha & Bravo One
- Alpha and Bravo One Sterndrives – All Horsepowers
- 15 Tooth Spline
- For 400HP+ Use Flo-Torq solid hub assembly. Replace A46 with A55 or order hub kit part number #835258K2
- For Bravo One XR and XZ drives, Use Flo-Tor 1 1/4″ hub assembly. Replace A46 with A65 or order hub kit part number #840389K06
Non-Mercury Engines: Non-Mercury Outboard/Sterndrive, 4-3/4″ Gearcase
- Evinrude/Johnson/OMC 1991 and newer – use hub kit 835265Q02
- Evinrude/Johnson/OMC 1990 and older – use hub kit 835267Q1
- Honda 135-225 HP – use hub kit 835278Q1
- Suzuki 150-300 HP – use hub kit 835281Q1
- Yamaha 150 -300 HP – use hub kit 835274Q1
- Yamaha 200-250 HP SHO – use hub kit 8M0075402
Online store with a wide selection of furniture and decor
Furniture is an invariable attribute of any room. It is they who give it the right atmosphere, making the space cozy and comfortable, creating favorable conditions for productive work or helping to relax after a hard day. More and more often, customers want to place an order in an online store, when you can sit down at the computer in your free time, arrange the furniture in the photo and calmly buy the furniture you like. The online store has a large catalog of furniture: both home and office furniture are available.
Furniture production is a modern form of art
Furniture manufacturers, as well as manufacturers of other home goods, are full of amazing offers: we often come across both standard mass-produced products and unique creations - furniture from professional craftsmen, which will be appreciated by true connoisseurs of beauty. We have selected for you the best models from modern craftsmen who managed to ingeniously combine elegance, quality and practicality in each product unit. Our assortment includes products from proven companies. Who for many years of continuous joint work did not give reason to doubt their reliability and honesty. All of them guarantee the high quality of their products, excellent operational characteristics, attractive appearance of the products, a long period of use of the furniture, as well as safety.